View C8062-01_1223784.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IMAGE SENSOR
InGaAs multichannel detector head
C8060/C8061/C8062-01
Designed for InGaAs linear image sensor
C8060/C8061/C8062-01 series are high sensitivity multichannel detector heads for use with InGaAs linear image sensors. C8060-01 is designed for the non-cooled InGaAs linear image sensors, while C8061-01 and C8062-01 for the thermoelectrically cooled InGaAs linear image sensors for detection at even lower light levels. C8060/C8061-01 and C8062-01 incorporate a low-noise driver/amplifier circuit that provide reliable operation from simple external signals. C8061-01 and C8062-01 also include a highly stable temperature controller that cools the sensor to a preset temperature level (C8061-01: Ts= -10 C, C8062-01: Ts= -20 C) as soon as the power is turned on. If the cooler fails and overheat occurs, the built-in protection circuit automatically turns off the power to maintain safety. Despite its compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections to other devices such as
Features
Applications
l Designed for InGaAs linear image sensor
C8061/C8062-01: TE-cooled type C8060-01: non-cooled type l Built-in driver/amplifier and temperature circuit l Highly stable temperature controller (C8061/C8062-01) Cooling temperature (Ta=10 to 30 C) fixed at -10 0.1 C (C8061-01), -20 0.1 C (C8062-01) l Simple signal input operation l Compact configuration
l Near infrared multichannel spectroscopy l Radiation thermometry l Non-destructive inspection l Optical fiber transmittance measurement
I Selection Guide
The table below shows InGaAs image sensors applicable for the C8061/C8060/C8062-01. Scince the C8061/C8060/C8062-01 do not include a InGaAs image sensor, so select the desired sensor and order it sparately.
Type No.
Type No. G9201-256R G9202-512R G9203-256R G9204-512R G9201-256S G9202-512S G9203-256S G9204-512S G9211-256S G9212-512S G9213-256S G9214-512S G9205-256W G9206-256W G9207-256W G9208-256W
Cooling non-cooling
C8060-01
C8061-01
One-stage TE-cooled
InGaAs linear image sensor Number of Number of Pixel size Active area *1 pixels active pixels [m(H) x m(V)] [mm (H) x mm (V)] 256 256 50 x 250 12.8 x 0.25 512 512 25 x 250 12.8 x 0.25 256 256 50 x 500 12.8 x 0.50 512 512 25 x 500 12.8 x 0.50 256 256 50 x 250 12.8 x 0.25 512 512 25 x 250 12.8 x 0.25 256 256 50 x 500 12.8 x 0.50 512 512 25 x 500 12.8 x 0.50 256 >251 50 x 250 12.8 x 0.25 512 >502 25 x 250 12.8 x 0.25 256 >251 50 x 500 12.8 x 0.50 512 >502 25 x 500 12.8 x 0.50 256 >244 50 x 250 12.8 x 0.25
C8062-01
Two-stage TE-cooled
*1: Number of active pixels: The total number of pixels whose dark current and sensitivity uniformity do not exceed the maximum values.
PRELIMINARY DATA Mar. 2003
1
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Absolute maximum ratings
Parameter Supply voltage (for digital circuitry) Supply voltage (for analog circuitry) Supply voltage
*2
Digital input voltage Operating temperature Storage temperature
C8060-01 C8061/C8062-01 C8060-01 C8061/C8062-01 C8060-01 C8061/C8062-01
Symbol VD1, VD2 *2 VA+ VAVp VF Topr Tstg
Min. -0.5 -
Typ. Max. +7 +18 -18 +7 +14 VD VD1, VD2 0 to +50 +10 to +30 0 to +50 0 to +50
Unit
V
C
I Electrical Characteristics [unless otherwise noted, Ta=25 C, C8060-01: VD=+5 V, VA+=+15 V, VA-=-15 V, C8061-01: VD1,2=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V]
Parameter Digital input Master clock (CLK) pulse frequency Data video readout frequency Master start (start) pulse width Digital output Power supply conditions High level Low level Symbol VIH VIL fCLK fv tst VoH VoL VD1 VA1+ VA1VD2 Vp VF -
High level (Io= -6 mA) Low level (Io=+6 mA) Digital circuitry Analog circuitry C8061-01 C8062-01 C8061-01 C8062-01
Min. +2.0 -0.5 1/fCLK +2.0 -
Typ. +5.0 +15.0 -15.0 +5.0 +6.0 +5.0 +6.0 +12.0 +1.2 +2.0 -
Max. VD1, 2 *4 +0.8 4 fCLK/8 +0.8 +5.25 +15.5 -15.5 +5.25 +6.25 +5.25 +6.25 +12.75 +100 +100 -50 +20 +1.7 +3.0 +100
Unit V V MHz Hz s V V V V V V V V V V mA mA mA mA A A mA
Voltage Other
*3
Current
*2: C8060-01 (VD1 only) *3: C8061/C8062-01 *4: C8060-01: +VD
VD1 (+5 VDC) VA+ (+15 VDC) VA- (-15 VDC) VD2 *3 C8061-01: +5 VDC C8062-01: +6 VDC C8061-01: +5 VDC *3 Vp C8062-01: +6 VDC VF (+12 VDC) *3
+4.75 +14.5 -14.5 +4.75 +5.75 +4.75 +5.75 +11.75 -
2
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Electrical and optical characteristics [Unless otherwise noted, Ta=25 C, C8060-01: G9201-256R (Cf=10 pF), VD=+5 V VA+=+15 V, VA-=-15 V C8061-01: Ts=-10 C, G9211-256S (Cf=10 pF) , VD1=+5 V VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Ts=-20 C, G9208-256W (Cf=10 pF), VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V ]
Parameter Symbol Min. Typ. C8060/C8061-01 0.9 to 1.7 Spectral response range l C8062-01 1.2 to 2.6 C8060/C8061-01 1.55 Peak sensitivity wavelength lp C8062-01 2.3 Saturation output charge Qsat 30 Conversion gain *5 G 0.3 C8060-01 2 Dark current C8061-01 ID 0.1 C8062-01 1000 C8060/C8061-01 *6 Photo response non-uniformity PRNU C8062-01 *5: Including the circuit gain. *6: Measured at 50 % of the saturated output charge. Except for the start pixel and the last pixel. Max. 8 3 4000 5 10 Unit m m m m pC V/pC pA/pixel pA/pixel pA/pixel % %
I Specifications for temperature controller (only for C8061/C8062-01) [Unless otherwise noted, Ta=25 C, C8061-01: Ts=-10 C, VD=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Ts=-20 C, VD=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V]
Parameter *7 C8061-01 C8062-01 Symbol
Min. Typ. Max. Unit -11 -10 -9 C Cooling temperature Ts -21 -20 -19 C Temperature control range -0.1 +0.1 C DTs 7 W Power dissipation of peltier C8061-01 Pp element C8062-01 11 W Cool down time to preset temperature to 5 min. Setting temperature for overheat protection *8 To +45 C *7: Other functions include error display, automatic power off, and detection of electrical oepns and shorts by the thermosensor. *8: Temperature at back side of housing. (between housing and fin)
3
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Spectral response
1.5 T=25 C T= -10 C (G9208-256W: T= -20 C) (Typ.)
PHOTO SENSITIVITY (A/W)
G9208-256W G9211 TO G9214 SERIES 1.0
0.5
0 0.5
1.0
1.5
2.0
2.5
3.0
WAVELENGTH (m)
KMIRB0022EA
I Equivalent Circuit
1 PIXEL
Cf=10 pF Cf=0.5 pF SHIFT REGISTER
CDS PHOTODIODE
OFFSET COMPENSATION
VIDEO
AD-TRIG TIMING GENERATOR
Vdd
INP Vss
CLK
RESET
Vref
EXTERNAL INPUT
KMIRC0010EB
4
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Block diagram 1 (C8060/C8061/C8062-01)
VP P. GND *1 VD2 D. GND VF (+12 V) LED TEMPERATURE CONTROLLER
*2 *1
TE+
TE-
THERM THERM THERMO-ELECTRIC COOLER *2 InGaAs IMAGE SENSOR INP Vref Vdd G9201-256S Vss G9203-256S G9211-256S G9213-256S G9208-256W CLK RESET Cf SELECT AD-TRIG
F. GND Temp Monitor Cooling control VD1 (+5 V) D. GND VA1+ (+15 V) VA1- (-15 V) A. GND START CLK
TH. H VOLTAGE REGULATOR
TIMING GENERATOR AMPLIFIER
Cf SEL EOS TRIGGER
Video DATA VIDEO MUX & AMPLIFIER AMPLIFIER DC CLAMP *1: +5 V (C8060/C8061-01), +6 V (C8062-01) *2: C8060-01 does not include the temperature controller and thermoelectric cooler.
KACCC0193EA
BUFFER AMPLIFIER
I Block diagram 2 (C8060/C8061-01)
VP (+5 V) P. GND VD2 (+5 V) D. GND VF (+12 V) LED TEMPERATURE CONTROLLER
*
TE+
TE-
THERM THERM THERMO-ELECTRIC COOLER * InGaAs IMAGE SENSOR INP Vref G9202-512S Vdd G9204-512S Vss G9212-512S G9214-512S CLK-ODD, CLK-EVEN RESET-ODD, RESET-EVEN Cf SELECT AD-TRIG-ODD, AD-TRIG-EVEN AMPLIFIER Video-ODD
F. GND Temp Monitor Cooling control VD1 (+5 V) D. GND VA1+ (+15 V) VA1- (-15 V) A. GND START CLK
TH. H VOLTAGE REGULATOR
TIMING GENERATOR
Cf SEL EOS TRIGGER
DATA VIDEO Video-EVEN AMPLIFIER DC CLAMP *C8060-01 does not include the temperature controller and thermoelectric cooler.
KACCC0194EA
MUX & AMPLIFIER
BUFFER AMPLIFIER
5
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Timing chart 1 (256 pixels)
START CLK
2 clocks
8 clocks
8 x (N-1) clocks
10 clocks
CLOCK RESET Video EOS TRIGGER DATA VALID
ch 1
ch 2
ch 3
ch 4
ch (N-3)
ch (N-2)
ch (N-1)
ch N
ch 1
ch 2
ch 3
ch 4
ch (N-3)
ch (N-2)
ch (N-1)
ch N
START CLK INTEGRATION PERIOD CLOCK RESET Video EOS TRIGGER DATA VALID ch 1 ch 2 ch 3
ch 1
ch 2
ch 3
Note: N is the number of pixels (N=256)
KACCC0195EA
I Timing chart 2 (512 pixels)
START CLK
2 clocks
8 clocks
8 x (N-1) clocks
10 clocks
CLOCK-ODD RESET-ODD VIDED-ODD AD-TRIG-ODD CLOCK-EVEN RESET-EVEN VIDED-EVEN AD-TRIG-EVEN EOS TRIGGER DATA VALID
ch 1
ch 3
ch (N-3)
ch (N-1)
ch 2
ch 4
ch (N-2)
ch N
ch 1
ch 2
ch 3
ch 4
ch (N-3)
ch (N-2)
ch (N-1)
ch N
START CLK CLOCK-ODD RESET-ODD VIDED-ODD AD-TRIG-ODD CLOCK-EVEN RESET-EVEN VIDED-EVEN AD-TRIG-EVEN EOS TRIGGER DATA VALID
INTEGRATION PERIOD
ch 1
ch 3
ch 2
ch 1
ch 2
ch 3
Note: N is the number of pixels (N=512)
KACCC0196EA
6
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Pin assignment of "signal I/O" connector 15-pin D-sub connector
8
7
6
5
4
3
2
1
15
14
13
12
11
10
9
KACCC0069EA
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Terminal name Cf SEL Data video VA1+ (+15 V) VA1- (-15 V) VD1 (+5 V) Start CLK EOS A. GND A. GND NC D. GND D. GND D. GND Trigger
Description Digital Input signal used to select conversion gain of charge amplifier in InGaAs image sensor. HCMOS compatible. High level or left open: Low gain (0.3 V/pc) Low level: High gain (6 V/pc) Analog video output. Positive polarity Analog power supply. Analog power supply. Digital power supply. Digital input signal for initializing the circuit. HCMOS compatible. Positive logic. Digital input signal for operating the circuit. HCMOS compatible. Rising edge operation. Digital input signal for indicating end-of-scan of the image sensor. HCMOS compatible. Negative logic. Analog ground. Analog ground. No Connection. Digital ground. Digital ground. Digital ground. Digital output signal for A/D conversion. HCMOS compatible. Positive logic.
7
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Pin assignment of "TE control I/O" connector (C8061/C8062-01) 9-pin D-sub connector
5
4
3
2
1
9
8
7
6
KACCC0075EA
Description Power supply. Analog output signal of the temperature of the InGaAs image sensor. Digital input signal for starting to cool down. HCMOS compatible. 3 Cooling control H-level or left open : cooling L-level : stand-by 4 Vp (+6V) Power supply for the thermoelectric cooler in the InGaAs image sensor. 5 VF (+12 V) Power supply for cooling fan. 6 D. GND Ground. 7 D. GND Ground. 8 P. GND Power supply return of the thermoelectric cooler mounted in the InGaAs image sensor. 9 F. GND Ground return for cooling fan. Note: Available for using same power supply (+6 V) for VD2 and VP. Caution: Do not connect VD2 and VP together on the backside of the 9-sub D-sub connector. These may be connected (shorted) at the power supply end, not 9-pin D-sub connector.
Pin No. 1 2
Terminal name VD2 (+6V) Temp Monitor
8
InGaAs multichannel detector head
C8060/C8061/C8062-01
I Dimensional outlines (unit: mm) C8060-01
2.0 0.5
34.0
FOCAL PLANE 100.0 62.0 11.0
80.0
90.0
60.0
50.0
FOCAL PLANE
82.0
Signal I/O
50.0 (4 x) M3 DEPTH 4
KACCA0088EA
C8061-01
35.0
2.05 0.5
34.0
FOCAL PLANE 77.0 100.0 62.0 11.0
TE Control I/O
80.0
90.0
60.0
50.0
FOCAL PLANE
82.0
Signal I/O
50.0 (4 x) M3 DEPTH 4
KACCA0089EA
9
InGaAs multichannel detector head
C8060/C8061/C8062-01
C8062-01
75.4
65.0
2.25 0.5
34.0
FOCAL PLANE 100.0
TE Control I/O
80.0
90.0
60.0
50.0
88.4
FOCAL PLANE
81.0
Signal I/O
50.0 (4 x) M3 DEPTH 4
KACCA0090EA
I Connection Example
NOT USED FOR C8060-01
TE Controller
POWER SUPPLY VF (+12 V) F. GND VP * P.GND VD2 * D. GND CONTROLLER Cooling Control D. GND 9 8 3 7 6 2 1 5 4
I/O SIGNAL
PULSE GENERATOR CLK D. GND Start D. GND POWER SUPPLY VD1 (+5 V) D. GND VA+ (+15 V) VA- (-15 V) A. GND Cf SEL D. GND 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CONTROLLER
S/H or A/D
Analog Input A. GND S/H Input D. GND
OSCILLOSCOPE CH1 GND Ext.Trig GND
KACCC0197EA
* C8061-01: +5 V, C8062-01: +6 V
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2003 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1089E01 Mar. 2003 DN
10

▲Up To Search▲

Price & Availability of C8062-01

	To Download C8062-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .